home
***
CD-ROM
|
disk
|
FTP
|
other
***
search
/
Gold Medal Software 3
/
Gold Medal Software - Volume 3 (Gold Medal) (1994).iso
/
comms
/
qcom310.arj
/
QCOM.DOC
< prev
next >
Wrap
Text File
|
1994-02-20
|
46KB
|
1,021 lines
QCOM.EXE
Revision 3.10
Feb 1994
------------------------------------------
Copyright 1990-1994 by RTFM Software and Richard W. Turenne
Winnipeg, Mb. All Rights Reserved
All users are granted a limited license to try QCom for thirty
day evaluation period to determine its' suitability.
QCom is USER SUPPORTED. It is not Public Domain and is not free.
This means, if you decide to use this program, please show your
support by registering it with the author.
To add INCENTIVE, those who register will be shown how to utilize
the user defineable functions. Users can pre-define other
external dos functions, or other external protocols, or batch files,
and access them with a single keystroke. Additionally, they will be
able to eliminate the "nag" screen when QCom ends.
------------------------------------------------------------------
-Page 1-
SYSTEM REQUIREMENTS:
Minimum of one floppy drive, 256K or more memory, and a modem of
course.
QCom Features:
+ Compact and VERY EASY to use.
+ Easy Modem Setup.
+ Modem finder.
+ Mouse support.
+ User Defined Main menu.
+ Configurable Com Port IRQ and address.
+ Easy Scripting. No programming experience required.
+ Extensive help.
+ Auto-Script maker.
+ FIFO (16550) UART support.
+ Transfer Protocols including Ascii, Xmodem, Xmodem1k, Ymodem,
YmodemG, Zmodem and any externals.
+ Terminal Emulation for TTY, ANSI, ANSI-BBS, VT100.
+ Auto download/upload triggering for ZModem and CIS QuickB.
+ AutoSend, AutoHangup Timers and AutoEnd.
+ Dialing Directory size limited only by available conventional memory.
+ 500 line Scroll Back Buffer with text quoter.
+ File tagging for batch Uploads.
+ QCom Mail Processor offline mail reader.
+ Function key and Alt-Key Macros.
-Page 2-
FIRST TIME SETUP AND CONFIGURATION:
Run QCom. QCom will execute the configuration utility, QComCFG.
If you're familiar with your communications hardware you can edit
the Com Port, modem string, etc in the Edit QCom.CFG screen.
Press F1 to go to the pull-down Menus.
Selecting from the various menus you can set your Com Port, Modem type
and any other options you wish. To exit, select the File Menu,
Save your changes, then Exit. Qcom will continue where it left off.
Wait a few moments while the modem is being initialized.
An error message usually means the modem has not been properly
initialized. Correct modem initialization is critical to all
operations that involve the modem. If the string from QCom Setup
is incorrect, please advise the author so that corrections can be
made. Refer to the Trouble Shooting section for solutions.
Special Character codes in QCom.CFG:
The "|" character will send a carriage return to the modem. The
"~" is a half-second pause to allow the modem time to execute the
commands in the initialization string. Some modems need more time
than others. The pause is executed by QCom and the modem will not
actually receive the "~" character.
Function key definitions are shown in the last ten lines. You can
configure your own "macros" here. Control codes can be sent with
the use of the "^" character.
Example: ^[ = an escape character
^M = a carriage return
Refer to any good ASCII chart for others.
-Page 3-
COMMANDLINE PARAMETERS:
In addition to specifying a script, the user can specify an
alternate configuration file and an alternate phone directory file.
This allows network users to have CFG and FON files tailored to
their individual needs.
Switches are:
/S = load and execute script file
/C = load alternate configuration file
/P = load alternate phone directory
/B = force monochrome
Usage is: QCOM [/Sfilename.SCR] [/Cfilename.CFG] [/Pfilename.FON] [/B]
Users may use the options in any sequence. The switches (/S,/C,/P)
must NOT have a space preceding the filename. When the commandline
options are not used, QCom defaults to QCom.CFG and QCom.FON.
TERMINAL EMULATION:
This version has built-in support for ANSI-BBS and straight TTY.
Pressing ALT-K will toggle between the two.
STATUS LINE EXPLANATION:
----------------------------------------------------------------------
Alt-Z:Help SEC Host system name Online 05:55:55 Z COM1:2400N8
----------------------------------------------------------------------
| |||| | | | | |
| |||| | | | | |
Commands |||| | | | | |
Script on -- ||| | | | | |
Echo On ----- || | | | | |
Capture On --- | | | | | |
Alarm Off ----- | | | | |
Host name --------------- | | | |
Carrier status --------------------------- | | |
Time connected ----------------------------------- | |
Transfer protocol -------------------------------------- |
Communication port, baud, parity and databits ------------------
-Page 4-
FILE TRANSFER PROTOCOLS:
Transfer protocols are used as a method of flow-control and error
checking when transferring files. These protocols are specified when
adding to the Dialing Directory. The Dialing Directory is displayed
when you press ALT-D. The use of ZModem protocol is recommended if
the host computer has the option available.
QCom will default to using the built-in protocol unless an external
protocol is otherwise specified when editing the Dialing Directory
or when doing a file transfer.
EXTERNAL PROTOCOLS:
QCom can be set up to use external protocols. In QCom Configuration
select the XFer Options under the Protocols Menu. From the Pop-up
list of protocols you can select and edit existing protocol options,
or add a new one by selecting an unused entry marked with " ******* ".
Options for the protocols supplied with QCom need not be modified.
Options for the DSZ examples can be modified to suit your requirements
but remember that QCom automatically sends the port number, baud
rate and appropriate pathname to these choices.
For other external protocols, options such as port, baud rate
and pathnames will have to manually entered where required.
Registered users are shown a shortcut way to pass these parameters
making it unnecessary to edit them whenever a baud rate or pathname
changes.
Note: An unregistered copy of QCom is not "crippled". The instruct-
ions for this feature of QCom are provided to all those who register.
SCREEN COLORS:
Screen colors can be changed in QComCFG by selecting the Colors choice
under the Terminal Menu.
-Page 5-
VARIOUS FUNCTIONS:
ALT-A:
Toggles the sound functions on or off.
ALT-B:
Allows the user to scroll back up to 500 lines of received data.
Search capabilities are provided for finding particular text and
the whole buffer can be written to disk using the Save command,
"S" (the filename defaults to "QComBuff.Txt") or erase the buffer
with "E". "Q" is for quoting previously received text. When "Q" is
pressed another menu of choices is presented and one line of text
will be highlighted. This highlighted line can be moved through
the buffer with the cursor keys, Home, End, PgUp, or PgDn. Lines
can be tagged or untagged by pressing "T" or the SPACE bar. Once
text is selected, it can be save to disk with "F" or immediately
sent to the host with "S". This last feature allows you to quote
lines from a message and return them to the host's editor when
answering that message online. "U" will untag all tagged lines
as will sending or filing.
ALT-C:
Communication parameters can be modified here. These changes
are in effect until changed again or until QCom ends.
Com Port must be set in QCOm.CFG. Port changes will not take
effect unless QCom is restarted.
-Page 6-
VARIOUS FUNCTION CONTINUED...
ALT-D:
Displays the dialing directory. Use the arrow keys to select
a number and ENTER to dial that number. Other keys that are
PGUP, PGDN, HOME and END. HOT TIP: Pressing ALT and a letter
will put the cursor on the first line beginning with that
letter.
Add a new entry with "A" or edit an existing one with "E". To
delete an entry press "D". You can dial the phone with a
manually entered number using "M".
Phone entries can be tagged or untagged with the Space bar.
This will cause QCom to continuously dial all tagged numbers
until a connection is made. Dialing of tagged numbers will
commence when the Enter key is pressed. Once a connection is
made and broken you will be returned to the Dialing Directory.
Continuous dialing will resume where it left off if Enter is
pressed again.
ALT-E:
Toggles local echo on or off. This is used when the host does
not echo back the characters that you enter. An "E" is
displayed in the left-hand box on the status line when local
echo is on.
ALT-F:
Toggles adding linefeeds to incoming and outgoing lines.
ALT-G:
Toggles output to printer on and off. Allows all incoming text to
be sent to the printer. Make sure the printer is online.
ALT-H:
Sends the hang-up string to the modem and toggles DTR.
ALT-I:
Will save the current screen image to a text file as specified
in the QCom.CFG file. Default filename is QCOM.SCN which can
be changed by editing the QCom.CFG file (use ALT-O).
ALT-J:
Allows shelling out to DOS without ending QCOM. External
programs can be executed while on-line. The user could make
use of other external file transfer protocols here if desired.
Though there is a better way. See registration section.
ALT-K:
Toggles between ANSI and TTY terminal emulation.
ALT-L:
Toggles the "capture" function. If on, all incoming text will
be saved in a file named as specified in the QCom.CFG file.
Default is QCOM.CAP. IF the file does not exist in the
default directory, it will be created. Otherwise data is
appended to an existing capture file. A "C" is displayed in
the left-hand box on the status line when capture is on.
ALT-M:
Sends the modem initialization string to the modem. This
string is automatically sent upon start-up (providing no
carrier is present).
-Page 7-
VARIOUS FUNCTIONS Continued...
ALT-N:
Split-screen separates incoming and outgoing keystrokes
during a "chat" session.
ALT-O:
Brings up the QCOM.CFG file to the screen for editing.
Press F10 to save the file and to set the Communication
parameters as shown in the file. Esc exits and makes no
changes.
If it were necessary to change baud or any other Communication
parameter while online, use ALT-O to edit and F10 to set
parameters. Changing the port specified here will have no
effect unless QCom is restarted.
ALT-P:
Sends the current password from an entry of the Dialing
directory when you have dialed and connected to that entry.
ALT-Q:
Load and execute a script.
ALT-R:
Re-dials the last phone number dialed when no entries are
"Tagged", or if entries are "Tagged", it will continue dialing
those.
ALT-S:
Toggles the Script Save function. See the Script section for
more information on making and using scripts.
ALT-T:
Allows changing of the transfer protocol currently in effect.
This can be done while on-line.
ALT-V:
Allows the use of an external editor or file viewer. The
editor (or file viewer) of choice is defined in the
configuration file.
ALT-U:
Will send a pure ascii text file to the host with no error-
checking. Ascii transfer is used to send a text file to the
host PC. For example, you might use it when sending a message
to an electronic mail service. Instead of editing the message
on-line, you can prepare your message in advance. Once on-
line, go into the message editing screen on the host and then
use ALT-U to upload your file.
ALT-W:
Wipes the screen clear.
ALT-X:
Ends QCOM.
-Page 8-
VARIOUS FUNCTIONS Continued...
ALT-Y:
QCom becomes the host computer. It will wait for any incoming
phone calls until ESC is pressed. When a call is received, QCom
will answer the phone. QCom sends the file HELLO.HOS
to the caller's PC. You can edit this file to suit your own
needs using an ANSI "editor" like TheDraw.
After this message file is sent, the caller is shown the
menu contained in the file "MENU.HOS"
The caller can select one of the choices or the Host can enter
selections.
"Help" sends a brief help screen, HELP.HOS to the user.
"Area" allows the user to change to a different subdirectory.
When a caller selects the Area command, a file called AREAS.HOS
is displayed on the caller's screen. This is intended to show
which "areas" (subdirectories in fact) the caller can have access
to. A sample AREAS.HOS file is included. Users will want to edit
this file to suit their systems.
"Files" allows the user to list specified files in that
subdirctory.
"Chat" will allow a dialogue between each PC. To end Chat
and return to the menu, the Host must press ESC.
"Upload" will send a file to the Host using DSZ ZModem.
"Download" will send a file to the caller in a similar manner.
If the caller specifies the correct path and filename, he will
be able to download a file from anywhere on the Host system.
"Proto" will allow the caller to select XModem, YModem or
ZModem protocols when transferring files.
"Goodbye" will send BYE.HOS and terminate the connection .
As Host, you can also terminate the call by pressing ALT-H to
hangup. QCom will then wait for the next caller. ALT-X will
also terminate the call and in addition, end QCom.
A local Host mode test is available: Press ENTER when waiting
for incoming calls. This allows preparation and preview of
your own host welcome messages or help screens.
PGUP:
Uploads (sends) a file to the other system. You will be
prompted to enter a filename to upload. The file can be
preceded by a path only if NO upload path is specified in
QCOM.CFG. If the host supports batch uploads then you can
take advantage of DSZ's capabilities; when prompted for a file
to upload enter the name of a file containing a list of the
files you wish to upload. Precede the filename with an "@" .
Example: "@files.lst". Or you can use QCom to create a list
file for you. When prompted for a file to upload press ENTER
with any global file specification (*.* or *.zip). You will
-Page 9-
VARIOUS FUNCTIONS CONTINUED...
be shown a box containing filenames based on that specification.
From here simply use the cursor keys to select a files and Mark
them with "M". When finished marking press ENTER and QCom will
create "Files.LST" and pass that to DSZ for you.
PGDN:
Downloads (receives) a file from the host computer. If XModem
or YModem are the protocols in effect, you'll be prompted to
enter the filename to receive. QCom tries to guess the
filename based on recently entered text and places its' guess
at the prompt.
If ZModem is in effect, entry of filenames is not required and
in fact, pressing PGDN is not required because QCom will call
DSZ automatically when it receives the Zmodem Receive string.
ALT-=:
Toggles "Doorway" mode. This removes the status line when in
Doorway mode and gives full screen display for using remote
applications.
Allows you to make full use of all keys while online. All
Alt-key combinations except ALT-= are sent out and their usual
functions are disabled in this mode. For example, PgUp,
PgDn, Home, End and the cursor key codes are transmitted. You
might make use of this when using a full-screen editor while
online or when using your PC as a dumb terminal on a non-DOS
system such as Unix. Status line and all key functions are
restored when Doorway mode is turned off.
ALT-Minus:
Enables/disables debugging during script execution. Status
line displays the next line of text which QCom is looking for.
ALT-Space:
Enables the user defined Main menu when at the terminal screen.
Ctrl-END
Sends Break signal to host. Used for terminating some mainframe
connections.
F1-F10:
Sends the text as listed in the last ten lines of QCom.CFG.
You can put your name, password, special key codes or whatever
you wish here. 80 characters max on each line.
Ctrl-F1
Displays the "Function Key Macros" as they appear in QCom.CFG.
Ctrl-F2
Displays the "Alt Key Macros" for registered users.
-Page 10-
SCRIPTS:
Scripts are used for automating repetitive tasks such as dialing,
logging in to an online service, and transferring files or
electronic mail. A script is generally made up of a series of
commands for QCom to execute at the appropriate time. The script
can tell QCom to send text to the host or it can make QCom execute
one of its' internal functions.
MAKING A SCRIPT:
QCom has a built-in Script-save feature to simplify the creation of
scripts. To create a typical login script you would do the
following:
1. From the Dialing Directory dial the number.
2. When the host answers and immediately after the Dialing box
clears, press Alt-S to start the script saver. It will prompt
you to enter the name of your script. If, for example, you're
calling CompuServe, you could name it CIS.SCR.
3. QCom will save each line of incoming text which prompts you for
input. For example the host may prompt you...
ENTER YOUR FULL NAME :
To which you respond by typing in your name and pressing ENTER
when the name is complete. Always type entries in, don't use
Function key macros when saving a script. If/when prompted to
press "ANY" key always press ENTER. QCom will store the host's
prompt, and the text you have entered in the script.
(Also Note: BBS software that has "HotKey" menu choices where
the user is not required to press ENTER after selecting a letter
is great BUT... when it comes to saving a script QCom will NOT
save the line unless you press ENTER. So when saving a script
turn off the Hotkey feature at the BBS end.)
4. QCom will also store any commands you give it such as ALT-L
to turn on the capture function.
5. When you wish to stop saving a script press Alt-S again.
6. To have this new script execute when you call this number again,
add the name of your script into that entry in the Dialing
Directory. The next time you dial that number the script will be
loaded and executed.
Sample script :
put a message on screen
;ECHO ^M This is the start of my script! ^M
let's capture the session to file.txt
;a-L file.txt
Do you want graphics (Enter)=no;^M
What is your full name?;John Doe^M
sends password from the Directory entry we just dialed
Password (Dots will echo)?;a-P
Scan Message Base Since 'Last Read' (Enter)=yes;^M
Press (Enter) to continue;^M
-Page 11-
MAKING A SCRIPT Continued...
receiving (downloading) a file
min. left) Main Board Command?;d^M
Filename to Download (Enter)=none?;file.arc^M
downloads "file.arc"
;D/L file.arc
Press (Enter) to continue;^M
goodbye
min. left) Main Board Command?;g^M
give hangup command
;a-H Y
execute another script
;a-Q MyBBS.SCR
The following is an example of a script that connects to
CompuServe through the DataPac network.
;ECHO Logging in to CompuServe. Please wait...
send "..." when connected
;...^M
send node id number when the word DATAPAC is received
DATAPAC;P 12345678^M
CompuServe Information Service
Host Name:;CIS^M
insert your user ID
User ID:;12345,6789^M
send password from dialing directory
Password:;a-P
check for mail or whatever
Enter choice!;5^M
etc, etc.
See the included file QCOM.SCR for more examples on scripting.
Note: When saving a script, QCom saves every line of incoming text on
which the user is prompted for input AND which is terminated with a
carriage return ( by pressing the ENTER key). Any line that prompts
the user and does not require the ENTER key to be pressed, will NOT
be saved in the script. Such lines would have to be manually typed
into the script with a text editor.
-Page 12-
MAKING A SCRIPT Continued...
In order to use a script automatically, put the name of the
script file in the SCRIPT column in the Dialing Directory.
One way to create a new script is to capture a session and then
edit it to conform to the above format, using the semicolons to
separate incoming and outgoing text. Any unnecessary text can be
deleted from the capture file (such as news bulletins, etc.).
Rename the file using ".SCR" as the extension in your script
filename.
COMMANDLINE SCRIPTS:
Commandline scripts allow you to start Qcom, dial a number, transfer
files, hangup and end Qcom automatically.
To create such a COMMANDLINE script, run Qcom, press ALT-S before
going into the Dialing Directory . Enter the name of your script,
and proceed to step the program through the whole dialing and
connection procedure. Qcom will save your commands as well as the
text coming in and going out.
To execute this script from the commandline use:
"QCom /SMyScript.scr"
The "/S" tells QCom that the following is the name of a script to
execute. You must use the full script filename.
When a script is executing you will see an upper case "S" on the
Status line. To stop script execution at any time, press ALT-S.
Note:
When your script dials a directory entry that has another script
specified, the second script will be ignored. You can, however,
call another script by using the ALT-Q command.
(eg. ";a-Q ANOTHER.SCR").
SCRIPT COMMANDS:
Most Script commands consist of shorthand for the keystrokes
you would use when manually running QCom. The ALT-Key commands
that QCom understands can be entered into a script with ";a-"
followed by the letter you wish to use. Eg. ALT-P would be ";a-p".
Upper or lower case will work.
Exceptions: ALT-- (ALT-Minus) and ALT-= cannot be saved or executed
in a script.
-Page 13-
SCRIPT COMMANDS CONTINUED...
The following are script commands that may be manually added to
scripts. These are NOT included in Saved scripts.
"ANY" - used to send a given response to text that is received
repeatedly.
eg. ;ANY Press any key;^M Whenever "Press any key" is
received, a carriage return will be sent. This will remain
in effect until the ANY command is used again in the script
to specify new incoming text.
eg. ANY
This effectively "turns off" a previous ANY command. QCom
will no longer respond to the previously specified incoming
text.
"DEBUG ON" -used in script debugging
The Status line shows which line of incoming text the
script is waiting for. This allows you to compare a script
line to actual received text to check for spelling errors
or typos in cases where a script is not working properly.
Pressing ALT-V during a debug session will load your script
into your editor so you can make corrections on the fly.
"DEBUG OFF" -disables the debug function.
"ECHO" -prints text on the local screen.
eg. ";ECHO Please wait. Auto Logon in progress..."
Text can be colorized and positioned on screen
using ANSI escape codes.
"LOG" - will save date, hostname, start time and duration
of calls in optional specified filename. If no log file
is specified, QCom defaults to "USAGE.LOG".
eg. ";LOG CIS.LOG" could store a log of calls to
CompuServe. Also provided is a utility to total the
durations of calls, named QTT.EXE. Usage: QTT LogFile.
"WAIT" - will pause the execution of a script for a specified
number of seconds. Eg. ";WAIT 5" will pause everything
for five seconds. Do not pause for too long if you expect
to have incoming data during this time. Hitting any key
will terminate a pause and continue the script.
"DOS" Allows you to shell to Dos and execute batch files or
whatever. Use the /WAIT switch after the commandline if
you wish to pause the display before returning to QCom.
eg:
;DOS vampire.bat /WAIT
-Page 14-
SCRIPT COMMANDS CONTINUED...
"ASK" Used to get user input from the keyboard. This will display
your "User Prompt" in a box and wait for user input. When
the user presses Enter, QCom will compare the user's input
to the text in "Answer". If it is the same then the script
will go to the "Label". Otherwise the script will continue
with the next line. Use commas to separate the prompt,
answer and label.
Usage: ;ASK User Prompt ,Answer,Label
eg:
;ASK Download your mail? (Y/N) ,Y,DownLoad Mail
;GOTO No Download
:DownLoad Mail
;...
"GOTO" To branch to another part of the script.
eg:
;GOTO Label 1
or...
When this text is received;GOTO Label 2
"CALL" To go to another part of the script and execute until the
RET (Return) command is encountered. It returns to the line
following the Call. Calls can be nested 255 levels.
eg:
When this text is received;CALL Label 3
or...
;Call Label 3
;END
:Label 3
Look for this text;send something^M
;RET
"RET" As above, used to return from a CALL. A RET must not be
executed unless a CALL has been executed first. RET cannot
be used with GOTO.
Usage: ;RET
"T/O" Timeout for incoming text. A given timeout value will apply
to any script line waiting for incoming text which follows
the T/O command.
To enable timeout use: ;T/O Seconds
To disable timeout use: ;T/O 0
Example:
;T/O 10
Wait for text for 10 seconds;Send if received before 10 secs
Otherwise wait for this for 10 seconds;...etc.
Disable timeout:
;T/O 0
-Page 15-
SCRIPT COMMANDS CONTINUED...
"ENQ" Have QCom do something upon receiving an ENQ character (^E).
A typical use would be when transferring a file on Compuserve using
the QuickB protocol. The following example shows how to have QCom
shell out to OZBext (an external QuickB protocol) to transfer a file
on Com port 2 when the ENQ character is received.
Eg: ENQ;DOS OZBext /c2 /x
Registered users may use port and file abbreviations, etc., where
appropriate, as per their instruction sheet.
After QCom receives this ENQ it stops looking for further ENQ's.
"END" Used to stop script execution.
eg:
;END
or...
When this text is received;END
"TAG" Used for tagging or marking Dialing Directory entries for
dialing.
eg:
;TAG PCUG
QCom will tag or mark all Dialing Directory entries starting with
"PCUG". To tag only one of several entries with similar names it is
necessary to have something unique in the name you wish to tag.
eg: ";TAG PCUG Node 1"
Note : When entries have been tagged with the above TAG command,
use the DIAL command without a specified name.
eg:
;TAG PCUG
;DIAL
This will cause QCom to dial all tagged entries until a connection
is made.
"UNTAG" QCom will untag all marked Dialing entries.
eg:
;UNTAG
The following are script commands that may be manually added to
scripts. These ARE included in Saved scripts.
"DIAL" -dials the entry specified. Eg. ";DIAL CompuServe"
"U/L" -uploads the specified file Eg. ";U/L Myfile.Zip"
"D/L" -downloads the specified file Eg. ";D/L Myfile.Zip"
"BREAK" -sends a BREAK signal to the host Eg. ";BREAK"
-Page 16-
Labels:
Like labels in batch files, a label is preceded by a colon and can
consist of one or more words or numbers. No semi colon is used as
in other script lines.
eg:
:Label 1
:Label 2
SEMICOLONS:
In a QCom script, the semicolon is all important. It divides each
line into incoming and outgoing text. Lines beginning with a semi-
colon are commands that QCom will execute (such as an ALT-Key
command).
Also note that only the first semicolon is used as a divider.
Subsequent semicolons are treated as regular text.
Any line of text in a script with no semicolon or colon is ignored
by QCom and can be used as a comment line for clarification when
viewing or editing the script.
Script execution takes place only in the terminal screen. If your
script executes something like ALT-B (ScrollBack) or ALT-Z (Help),
manual input will be necessary to return to the terminal screen to
continue script execution.
FINAL NOTE ON SCRIPTS:
When saving a script, incoming phone noise may be saved during a
session and will have to be edited out before using the script.
It's wise to double-check a newly created script for any unwanted
characters. Any pure text editor can be used to edit or create a
script file.
-Page 17-
TROUBLE SHOOTING:
Symptom: Modem returns "ERROR" when initializing.
This simply means that one or more commands in the modem initialzation
string is not understood by the modem. The modem initialzation string is
stored in QCom's configuration file call QCom.CFG. You can view and edit
this string if you wish. Press ALT-O to enter the Options screen where
you will find the modem Init string.
Refer to your modem instruction manual to compare the modem commands
against thoise contained in the initialization string and delete those
that your modem doesn't understand. Save and exit with F10.
To test the string press ALT-M to reinitialize the modem.
Symptom: "Cannot initialize Com Port x" error message. (x = 1 to 4)
Meaning of error message: Qcom cannot find the Com Port that is
specified in the configuration file (QCom.CFG).
Possible causes:
1. Error in configuration file. The number specified there does not
match the Com Port used by the modem.
2. Hardware problem. Two or more devices are configured for the same
Com port or the Com port specified is not installed.
Check that there is no conflict in hardware interrupt settings.
If two serial devices attempt to use the same Interrupt (IRQ)
setting chances are, neither will work. Typical settings would be:
Com1 using IRQ 4, at I/O 3F8h
Com2 using IRQ 3, at I/O 2F8h
Com3 using IRQ 4, at I/O 3E8h
Com4 using IRQ 3, at I/O 2E8h
3. Software conflict. A memory resident program that ties up the Com
port has been previously executed and has not been deinstalled.
Carbon Copy is an example of such a program.
Symptom: "Modem not responding"
Meaning of message: Modem did not respond with "OK" within the
alotted time.
Possible causes: See the following:
Symptom: Modem does not dial out. Modem does not receive some/all
commands sent by QCom.
Possible causes:
1. Baud rate specified in the configuration file is too high for the
modem. Set the default baud rate to your modem's fastest speed. Modem
will send back an "OK" when you initialize the modem (Alt-M) if
all is well.
2. External modem is not powered up or not connected properly.
3. Possible hardware conflicts with another installed serial device.
Internal modem has been improperly installed or configured.
4. Modem initialization or dialing prefix strings are incorrect.
Refer to the Modem instruction manual for the correct strings for
your modem.
-Page 18-
TROUBLE SHOOTING Continued...
5. Modem is incorrectly configured. Refer to modem manual and set
modem dip switches or NVRam for the following:
a) Modem must track the actual state of DCD (Carrier) and not be
forced.
b) Modem should track DTR and not be forced.
c) Modem MUST send back verbal result codes such as "OK" or
"CONNECT", etc.
6. See the following
Symptom: QCom status line says "Online" even when not.
Cause:
Modem Carrier Detect line is forced on. This MUST toggle on or
off depending on the actual Carrier state. This is set with a
modem dip switch or a command sent in the initialization string.
Refer to the modem manual. Edit the initialization string if
necessary and use Alt-M to manually send the string to the modem.
Or toggle the Carrier detect dip-switch if present.
Many modem factories typically set this to default to always on.
One result of this is QCom will prompt you whether you want to
initialize the modem at start-up which is an unnecessary annoyance
(the prompt is necessary in the instance where QCom is used as a
dumb terminal attached directly to another machine).
Symptom: Pressing Alt-M to re-initialize the modem gets back
"ERROR" from the modem.
Cause:
The modem initialization string (line six in the QCom.CFG file)
contains command(s) that the modem does not understand. Or, the
command string is too lengthy. Refer to the modem manual and
remove any command not found in the manual. Long initialization
strings can be broken up into two sections with "^M~~~AT" inserted
about halfway.
Symptom: QCom reports "Unable to find DSZ.COM or DSZ.EXE"
Cause:
DSZ.COM or DSZ.EXE are not found in the default directory (the
same directory as QCom) or in the search path. Put DSZ into
correct directory.
Symptom:Always get a fast busy signal after dialing.
Cause:
a) Call waiting string in Options is enabled when the feature
is not present on the phone line. Disable the string by erasing
it or prefix it with a semicolon.
b) A pause character may need to be added after the string. Most
modems recognize a comma as a half second pause. eg:"*70,,"
-Page 19-
ONLINE SUPPORT BBS:
To obtain further help, or for the latest update of Qcom, you
can call the support BBS:
************************************************
* Programmer's Oasis, Ph. 1-204-478-3562. *
************************************************
When calling in, login as a new user with your full name and
password of your choice. After answering a few questions you
will be given the opportunity to go into the QCom area.
Once there you will have 30 minutes to send or receive messages
and download files. Questions about QCom should be directed
to the author, not the Sysops.
Sysops Brian Lowe and Bernie Minuk are to be commended for
all their effort and enthusiasm in setting up and maintaining
this support area on their BBS. Thanks guys, for doing an
outstanding job.
DISCLAIMER:
This software is provided "as is" without warranty either express or
implied. The user assumes all responsibility in determining its'
usefulness and or fitness for any purpose, and assumes all risks and
liabilities including damages for loss of business profits, business
interruption, or loss of business information arising from the
operation of this software.
-Page 20-
**************************************************
QCOM REGISTRATION
If you use QCom, please register it. This
software is the result of a great deal of time
and effort. Please support its' continued development
and the Shareware concept.
WHY REGISTER ?
Those who register will be shown how to set up and use the
user defineable ALT-Key functions. Users can pre-define other
external protocols, or DOS commands, and access them with a single
keystroke. These instructions are essential to make the most of QCom.
Additionally, registrations are the ONLY motivation to continued
development of QCom. The time spent on QCom development is directly
proportional to the number of registrations. Your support matters.
The one-time registration fee is a modest $20.00.
To receive a copy of the absolute latest version on
disk, send an additional $5.00 to cover cost
of disk, packaging and mailing. Specify disk
size desired and your current version.
A quick mailer is provided in the file called Register.
Send a check or money order to:
RTFM Software
108 Egesz St.
Winnipeg, Mb. Canada
R2R 2E1
Your comments, questions, suggestions and bug reports
are always welcome whether or not you register.
Drop me a note, leave a message on CompuServe I.D. 72361,3117.
Or, leave a message on Programmer's Oasis BBS, Ph. 1-204-478-3562.
**************************************************
-Page 21-